Polyurethane Lacquer Clear Epifanes 750 gr

Epifane's two-component clear coat of polyurethane provides a durable surface for your table or kitchen bench project. When you need a durable surface with a good filter for ultraviolet light. The UV filter prevents the surface from turning yellow from the sun's UV light. It is always an advantage to add a layer of this polyester and polyurethane varnish if you have a surface that should be durable and protect against yellowing.

Can be used both indoors and outdoors.

1. Make sure that what is to be painted is sanded, cleaned and degreased.
2. The varnish is mixed with 1 part hardener component B and 2 parts base component A.
3. Mix well, but try to avoid bubbles, and leave for 20-30 minutes before use
4. Open time 2-6 hours depending on temperature, 3-4 hours at 20 degrees.
5. Room temperature should be between 15 and 27 degrees.
6. The surface is dust-dry after 2 hours at 20 degrees. Sanding between coats is not required as long as no more than 48 hours pass between coats. A new coat is applied after 24 hours at the earliest, and the varnish is fully cured after 7 days. The times are temperature dependent and lower temperatures will extend the time.
7. Apply the varnish in thin layers so that it does not run.
8. 750 grams covers approximately 9 square metres.

Can be advantageously thinned with this Epifanes thinner for 2-component varnish before application with a foam brush , paint brush or roller.

See data sheet and safety information here:

Data sheet for Epifanes Blank Klar

Datasheet for Epiphanes Herder